利用激光诱导击穿光谱原位在线检测褐煤及煤烟

褐煤是我国现阶段的主要用煤,但因为其较低的煤化程度,使用时会产生污染环境的二氧化碳和黑灰,而且烟尘中含有的金属离子会危害人体健康,所以开展对褐煤烟尘的研究非常有意义。而激光诱导击穿光谱技术(LIBS)具有快速、多元素同时分析的特点,适合用于煤烟的原位在线探测。实验制备了含铅浓度不同的三种褐煤样本(O, H, L),其中O为原始无铅样本,利用LIBS对褐煤及煤烟进行原位在线探测。实验仪器主要由激光器,反射镜,聚焦透镜,触发装置,载物平台和分析系统组成。用高纯度铅块校准实验中的的波长漂移。分析了褐煤样本O, H, L的元素成分。发现褐煤O中含有C, Si, Fe, Mg, Al, Ca, Sr, Na等元素,同时检测到空气中的元素N,O,H_α和H_β等,且含铅褐煤光谱中多出了8条铅元素的谱线,最后给出了褐煤中主要元素的光谱鉴别表。然后使用447 nm的连续光点燃褐煤,将1 064 nm的脉冲光聚焦在煤烟上,对褐煤煤烟进行了原位在线检测。发现煤烟中含有Mg, Ca, Al, Sr, Pb等金属离子,说明了褐煤中的一些金属离子会随着煤烟排放到空气中并危害人体健康。经褐煤及煤烟的光谱比较,发现煤烟的信噪比更差,且所有元素的谱线强度都比在褐煤中弱很多,另外发现在烟尘中碳原子谱线的相对强度是所有元素中最高的（无明火）,这说明LIBS可以有效探测CO₂。分析了实验中的CN分子谱,给出了CN分子的具体波长,并利用LIFBASE软件拟合了CN分子的转动温度和振动温度,分别为6 780和7 520 K。最后对样本H和L两种煤烟中的铅浓度进行分析,选取参考线(Ca Ⅱ 363.846 nm)归一化之后比较了铅元素在363.956, 368.346和405.780 nm处的相对强度,发现这三条特征谱线的相对强度与自身实际所含的铅浓度呈很好的线性关系,验证了LIBS技术应用于煤烟中重金属元素半定量分析的可行性。     

Ultrasound-assisted soil washing processes for the remediation of heavy metals contaminated soils: The mechanism of the ultrasonic desorption

Ultrasound-assisted soil washing processes were investigated for the removal of heavy metals (Cu, Pb, and Zn) in real contaminated soils using HCl and EDTA. The ultrasound-assisted soil washing (US/Mixing) process was compared with the conventional soil washing (Mixing) process based on the mechanical mixing. High removal efficiency (44.8% for HCl and 43.2% for EDTA) for the metals was obtained for the most extreme conditions (HCl 1.0 M or EDTA 0.1 M and L:S = 10:1) in the Mixing process. With the aide of ultrasound, higher removal efficiency (57.9% for HCl and 50.0% for EDTA) was obtained in the same extreme conditions and similar or higher removal efficiency (e.g., 54.7% for HCl 0.5 M and L:S = 10:1 and 50.5% for EDTA 0.05 M and L:S = 5:1) was achieved even in less extreme conditions (lower HCl or EDTA concentration and L:S ratio). Therefore, it was revealed that the US/Mixing was advantageous over the conventional Mixing processes in terms of metal removal efficiency, consumption of chemicals, amount of generated washing leachate, and volume/size of washing reactor. In addition, the heavy metals removal was enhanced for the smaller soil particles in the US/Mixing process. It was due to more violent movement of smaller particles in slurry phase and more violent sonophysical effects. In order to understand the mechanism of ultrasonic desorption, the desorption test was conducted using the paint-coated beads with three sizes (1, 2, and 4 mm) for the free and attached conditions. It was found that no significant desorption/removal of paint from the beads was observed without the movement of beads in the water including floatation, collision, and scrubbing. Thus, it was suggested that the simultaneous application of the ultrasound and mechanical mixing could enhance the physical movement of the particles significantly and the very high removal/desorption could be attained.     

络合剂在超临界CO_2络合萃取重金属离子中的研究进展

本文综述了络合剂在超临界CO2萃取重金属离子中的应用状况,分析并概括了不同类型络合剂在超临界CO2萃取重金属离子应用中的萃取范围、萃取效果以及优缺点,最后对络合剂的发展前景进行了展望。     

Prediction of hydrogen solubility in heavy hydrocarbons over a range of temperatures and pressures using molecular dynamics simulations

Using the method of molecular dynamics (MD), we have estimated the solubility of hydrogen in heavy hydrocarbons for a range of temperatures and pressures. Heavy hydrocarbon systems are known to be challenging not only for experimental measurements but also for reliable estimations using traditional equations of state (EOS). The simulation system used was designed with semi-permeable membranes to mimic actual experimental studies of gas solubility. Binary interaction parameters between the solute gas and the solvent (heavy hydrocarbons) components were adjusted when necessary to improve agreement with experimental results and then used in subsequent multi-component studies. Temperature and pressure ranges studied included higher temperatures and pressures which are especially difficult to investigate experimentally. Simulation results were finally used to adjust the binary interaction parameters (BIP) in simulation packages (e.g. Aspen) to enable quick and reliable predictions.     

Individual and simultaneous determination of lead, cadmium, and zinc by anodic stripping voltammetry at a bismuth bulk electrode

A bismuth bulk electrode (BiBE) has been investigated as an alternative electrode for the anodic stripping voltammetric (ASV) analysis of Pb(II), Cd(II), and Zn(II). The BiBE, which is fabricated in-house, shows results comparable to those of similar analyses at other Bi-based electrodes. Metal accumulation is achieved by holding the electrode potential at −1.4 V (vs. Ag/AgCl) for 180 s followed by a square wave voltammetric stripping scan from −1.4 to −0.35 V. Calibration plots are obtained for all three metals, individually and simultaneously, in the10-100 μg L⁻¹ range, with a detection limit of 93, 54, and 396 ng L⁻¹ for Pb(II), Cd(II), Zn(II), respectively. A slight reduction in slope is observed for Cd(II) and Pb(II) when the three metals are calibrated simultaneously vs. individually. Comparing the sensitivities of the metals when calibrated individually vs. in a mixture reveals that Zn(II) is not affected by stripping in a mixture. However, Pb(II) and Cd(II) have decreasing sensitivities in a mixture. The optimized method has been successfully used to test contaminated river water by standard addition. The results demonstrate the ability of the BiBE as an alternative electrode material in heavy metal analysis.     

Simultaneous Determination of Cadmium,Lead, Copper and Mercury Ions Using Organofunctionalized SBA‐15 Nanostructured Silica Modified Graphite–Polyurethane Composite Electrode

A new sensor has been developed for the simultaneous detection of cadmium, lead, copper and mercury, using differential pulse and square wave anodic stripping voltammetry (DPASV and SWASV) at a graphite–polyurethane composite electrode with SBA‐15 silica organofunctionalized with 2‐benzothiazolethiol as bulk modifier. The heavy metal ions were preconcentrated on the surface of the modified electrode at ?1.1 V vs. SCE where they complex with 2‐benzothiazolethiol and are reduced to the metals, and are then reoxidized. Optimum SWASV conditions lead to nanomolar detection limits and simultaneous determination of Cd²⁺, Pb²⁺, Cu²⁺ and Hg²⁺ in natural waters was achieved.     

Removal of Cu(II) and Zn(II) from industrial wastewater by acid-activated montmorillonite-illite type of clay

An acid-activated montmorillonite-illite type of clay collected from the Gulbarga region of Karnataka, India was examined for removing copper and zinc ions from industrial wastewater containing Cu(II), Zn(II) and minor amounts of Pb(II). Langmuir, Freundlich, Brunauer-Emmett-Teller (BET), and competitive Langmuir (two competing ions) isotherms were fitted to experimental data and the goodness of their fit for adsorption was compared. The shapes of isotherms obtained indicated multilayer adsorption of Cu(II) and monolayer adsorption of Zn(II) on the acid-activated clay. Competitive adsorption was found to be significant due to the presence of Cu(II) in the wastewater.     

Gemini表面活性剂烷烃尾链在吸附和聚集过程中的疏水协同效应(英文)

以表面张力法测定了系列Gemini表面活性剂m-6-m以及对应单体表面活性剂CmTABr的临界胶束浓度(cmc)和降低水表面张力20mN·m-1需要的浓度(pC20).比较这些参数表明m-6-m胶束化和在界面吸附的能力均强于CmTABr,这被归结为Gemini表面活性剂烷烃尾链间的疏水协同效应.与不对称Gemini表面活性剂12-6-m比较,对称的Gemini结构更有利于表面活性剂的聚集和吸附.     

重质油胶体聚集结构的耗散粒子动力学模拟

重质油是以沥青质为胶核分散于饱和油分中形成的极其复杂的胶体体系.本文采用耗散粒子动力学(DPD)方法研究重质油的胶体结构及其影响因素.根据重质油各组分的分子结构特征,构建了描述重质油组分的粗粒化模型化合物.模拟结果表明,本文构建的粗粒化模型能很好地反映重质油的胶体聚集结构.沥青质分子结构对胶体聚集结构有序性有显著影响,较高稠合程度的芳香环结构将使胶束结构有较高的有序性,烷基侧链则表现出分散作用.重质油中的胶质具有胶溶作用,胶质与沥青质的浓度比存在一个极限,当小于这个极限时,重质油将出现聚沉.     

不同产地几种中药材中重金属含量测定及砷的形态分析

通过对不同产地几种中药材中砷、铅、镉、铜以及无机砷、三价砷含量的分析测定,得出样品中砷、铅、镉、铜以及无机砷、无机三价砷的测定RSD〈3%,加标回收率在91.32%—109.7%之间。11个样品的总砷含量在0.047—1.681μg/g之间,均低于2μg/g;无机砷含量为0.023—1.294μg/g;无机三价砷含量为0.019—0.918μg/g;铅含量两份样品未检出,其余样品为0.007—0.786μg/g,均低于5μg/g;镉的测定,两份样品未检出,其余样品含量为0.007—2.129μg/g,其中两份样品大于0.3μg/g;铜含量为4.441—14.07μg/g,均低于20μg/g。研究发现同种药材不同产地的重金属含量差异较大,部分产地金银花中镉含量超标严重,无机砷和三价砷含量相对较高,需引起重视。